Backed by years of experience, we are specialized in manufacturing, importing and exporting a wide range of industrial laboratory equipment of medical products such as Infrared Moisture Balance. These are used to measure moisture contents on solids, which are available in powdered form. We provide these Infrared Moisture Balance in customizes from as well as per the needs of the clients.

We provide an exclusive range of Stationary Magnetic Crack Detector which is used for non-destructive testing of iron and steel parts. This specific product helps in locating all defects and the cracks as they can be magnetized. It helps in detecting the defects such as fatigue cracks, heat cracks, grinding checks forging laps, shrinks and tears in casting. It also detects the improper welds and inherent defects in metal such as seams and inclusions and also the cracks which occur due to the over stressing of parts. Our manufactured Stationary Magnetic Crack Detector is used to detect the defects which cannot be seen with the naked eye.

Our gamut of ultrasonic Concrete Tester is highly appreciated by our clients for its unique features like fast concrete testing using non-destructive techniques, better viewing facility at site under high ambient light conditions, completely portable with optional battery operation and it uses TTL integrated circuits and silicon semiconductors throughout for highest reliability. Some of the other features of this product are as follows:

• Remote hold facility makes single man operation feasible
• Facility for viewing received waveform on CRO
• No adjustment before or during each reading
• Gives reading directly in microseconds with positioned decimal nominal 3 p.r.r and 30 p.r.r switch selected rate

Specialization

• Display: Four Digit seven segment display with LED over-range indication
• Time measurement: 0.1 to 999.9microseconds in single range with least count of 0.1 micro seconds throughout
• Accuracy: +/-0.1 microseconds for entire range
• Measurement range: approx 1.5 mtrs in concrete
• Input sensivity: 150 microvolt between 50 khz to 500 khz
• Input impedance: 1 mohn approx
• Energizing pulse: 600 v peak for 2 microseconds
• Pulse repetition: Power supply: mains 230 v+/-15%, 50-60 hz, 6 v battery, 10 amp-hour capacity at least
• Power consumption: on mains, 10 watts (average), capable of 6 hours continuous operation with 6v-10 amp-hour battery
• Standard probe: 150 khz approx Resonant frequency
• Dimensions: 230 (L) x 130 (H) x 280 (D) mm (basic unit)
• Weight: 3 kgs (approx.) excluding battery
• Ambient temp. range: 00C to 450C

We manufacture a wide array of Digital pH Meter which is used in the laboratories or for research purposes. These are used to measure pH of all types of liquids. We supply the pH meters with combination electrode, electrode stand with clamp, buffer of 4 & 7 pH, KCI, automatic temperature compensator, instruction manual and guarantee card.

 

Model Specifications:

• pH-100, pH / mV Meter MODEL
• pH-110, pH / mV/C Meter
• Range : 0-14, pH 0-14 pH
  
• Accuracy : 0.01pH: 1mV, 1 Digit, 0.01 pH: 1mV, 1 Digit
  
• Display : 3 ½ Digit 12.7 mm LED, 3 ½ Digit: 12.7 mm LED DPM 4 ½ Digit, 4 ½ Digit TEMPERATURE Manual + Automatic
  
• Range : (Compensation)0 -100 C
  
• Measurement Accuracy Compensation : 0 -100 C
•  Digital Display : 0 -199 C 0.1 C Manual + Automatic
  
• Input Impedance : 1012 OHMS 1012 OHMS POWER 230V 10% ; 50 Hz 230V 10% ; 50 Hz
  
• Ds Titration Output : Polarization current output

Spares (OPTIONAL):

• Combination Electrode (Glass body - Indigenous.)
• Epoxy body Gel filled Combination Electrode
• Epoxy body Gel filled Combination Electrode (Imported)